In stamping parts processing, there are various kinds and USES of stamping parts, so there are different requirements for their materials. This will cause the processed products to fail to meet the performance requirements. Due to poor forming performance, some measures must be taken to improve the manufacturing cost of parts.
Stamping parts processing, the blank is mainly plate, strip, pipe and other profiles, through the use of stamping equipment through the role of the mold, so as to obtain the required parts shape and size. Materials, molds and equipment are the three elements of stamping.
The hardness of stamping parts is tested by rockwell hardness tester. Small precision stamping parts with complex shapes can be used to test surfaces that are too small to be tested on a standard rockwell hardness tester. Alloy stamping parts are the most commonly used parts in the field of metal processing and mechanical manufacturing. Stamping parts processing is a method of separating or forming the metal sheet strip by means of die. Its application scope is very wide.
Die is the main processing equipment of stamping. The surface quality, dimensional tolerance, productivity and economic benefit of stamping parts are closely related to the die structure and rational design. According to the combination of stamping process, there are: single process of simple die, multi-process of continuous die and composite die.
Stamping equipment is mainly mechanical press and hydraulic press. High speed press or multi-station automatic press should be used in mass production. In small batch production, especially in the production of large plate stamping parts, hydraulic press is often used.
